Index: doc/modeling/BSR/BSR_P2_S1_BysMcmc.lyx
===================================================================
--- doc/modeling/BSR/BSR_P2_S1_BysMcmc.lyx	(revision bd324f8fcb47c981407c0dafe3f2e26223c9723e)
+++ doc/modeling/BSR/BSR_P2_S1_BysMcmc.lyx	(revision affe3b9982d94dfcec48bba955a7b31ddf6364ad)
@@ -1,4 +1,4 @@
-#LyX 1.5.3 created this file. For more info see http://www.lyx.org/
-\lyxformat 276
+#LyX 1.6.0 created this file. For more info see http://www.lyx.org/
+\lyxformat 345
 \begin_document
 \begin_header
@@ -28,4 +28,8 @@
 \hypersetup{urlbordercolor=0 0 0,pdfborder=0 0 1 [3 2]}
 \end_preamble
+\use_default_options false
+\begin_modules
+theorems-ams
+\end_modules
 \language spanish
 \inputencoding auto
@@ -38,7 +42,9 @@
 \font_sf_scale 100
 \font_tt_scale 100
+
 \graphics default
 \paperfontsize default
 \spacing single
+\use_hyperref false
 \papersize default
 \use_geometry false
@@ -65,5 +71,6 @@
 
 \begin_layout Chapter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "cha:BysMcmc"
 
@@ -85,6 +92,12 @@
 \begin_layout Standard
 El fichero principal de este apartado es 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_bysMcmc.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_bysMcmc.tol
+\end_layout
 
 \end_inset
@@ -120,5 +133,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sec:Opciones-del-sistema"
 
@@ -143,35 +157,35 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Configuration default values over all BysMcmc related components
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //Options used over all BysMcmc related components
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   NameBlock Options =
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   [[
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Scalar samplers draws a univariant distribution given the logarithm
@@ -179,80 +193,80 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //density function and a domain interval
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The API of a scalar sampler  is given by a function like this
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //  Real (Code logDens, Real x0, Real x1)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     NameBlock Scalar.Sampler = 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     [[
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       Real Arms(Code logDens, Real x0, Real x1)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       {
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
         ARMS(logDens, x0, x1)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       };
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       Real Slice(Code logDens, Real x0, Real x1)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       {
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
         MatDat(SliceSampler1D(logDens, x0, x1),1,1)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
       }
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     ]]
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   ]];
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
@@ -280,55 +294,55 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Configuration default values over all BysMcmc related components
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   Set _config =
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   [[
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //MCMC dimensions
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The final number realizations that will remain after burnin
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mcmc.sampleLength = 2000;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The frequency of simulation notifying and chain cache updating
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mcmc.cacheLength = 100;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The number of first realizations that will be skiped at inference
@@ -336,115 +350,115 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //diagnostic time
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mcmc.burnin = 100;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Only one of each this number of simulations will be selected for 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //inference and diagnostic
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mcmc.thinning = 1; //thinningg
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Maximum of time in seconds dedicated to simulation
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Process will be stoped after mcmc.sampleLength + mcmc.burnin 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //simulations or mcmc.maxTime seconds will be elapsed
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mcmc.maxTime = 1/0;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //MLS step configuration
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Text mls.method  = Options::Mls.Method::None;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mls.maxIter = 100;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mls.tolerance = 0.01;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real mls.FunnelGibbs.sigmaFactor = 0.01;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //Basic master configuration
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //If solution error is great than this value a warning will be shown
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real bsr.cholesky.epsilon = 1.E-13;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The notifying frequency of Cholesky warning
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real bsr.cholesky.warningFreq = 100;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The number of burnin realizations in Gibbs drawing of truncated 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //multinormal
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real bsr.truncMNormal.gibbsNumIter = 0;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Scalar sampler used in ARMA block of basic BSR can be a member of
@@ -452,15 +466,15 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //BysMcmc::Options::Scalar.Sampler or an API equivalent function
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Code bsr.scalarSampler.armaBlock = Options::Scalar.Sampler::Slice;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Scalar sampler used in ARMA block of basic BSR can be a member of
@@ -468,50 +482,50 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //BysMcmc::Options::Scalar.Sampler or an API equivalent function
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Code bsr.scalarSampler.nonLinBlock = Options::Scalar.Sampler::Slice;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Arima filter method
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Text bsr.arimaFilter = Options::Arima.Filter::FastChol;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //CODA and other diagnostic report configuration
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The quantile to be estimated in Raftery test
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.raftery.diag.q = 0.025;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The desired margin of error of the estimate in Raftery test
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.raftery.diag.r = 0.007;  
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //The probability of obtaining an estimate in the interval (q-r,q+r)
@@ -519,15 +533,15 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Raftery test
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.raftery.diag.s = 0.950;  
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Precision required for estimate of time to convergence in Raftery
@@ -535,45 +549,45 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.raftery.diag.eps = 0.001;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Lag of AutoCorrelation Function 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.acf.lag= 20;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Number of divisions in histograms
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.histogram.parts = 100;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Number of divisions in kernel density aproximations
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real report.kerDens.points = 0;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   //Generic flags
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //If positive then is the number of existent realizations to be recovered
@@ -581,20 +595,20 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //from disk
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //If negative then is the number of last existent realization to be
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //skyped
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //If zero then no resuming will be made and a new Markov chain will
@@ -602,25 +616,25 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //generated
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real do.resume = 0;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Enables or disables CODA and other diagnostic reports
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real do.report = True;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Enables or disables in-sample evaluation of forecasting, filter, noise,
@@ -628,30 +642,30 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //residuals, ...
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real do.eval = True;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     //Enables or disables in-sample evaluation of individual linear effects
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
     Real do.linear.effects = True
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   ]];
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
@@ -678,10 +692,10 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Searches a parameter in the user defined configuration NameBlock and,
@@ -689,35 +703,35 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //not exists returns default value of BsyMcmc::Config
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Anything GetCfgVal(NameBlock config, Text member)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 {
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   StdLib::GetConfigValue(config,member,Eval("BysMcmc::Config::"+member))
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 }
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
@@ -732,5 +746,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sub:Nameblock-BysMcmc::BuildCycler()"
 
@@ -742,6 +757,12 @@
 \begin_layout Standard
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_build.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_build.tol
+\end_layout
 
 \end_inset
@@ -764,60 +785,60 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Identificador del modelo
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Text get.name (Real unused)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Identificador de la sesión de trabajo
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Text get.session (Real unused)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Camino donde se almacena la cadena de Markov en formato binario BBM
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Text get.path (Real unused)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Nombres de los parámetros de la cadena de Markov
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Set get.colNames (Real unused)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Simula una realización de la cadena de Markov
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Matrix draw (Real numSim)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Evalúa los componentes (filtro, ruido, residuos, previsión, ...) de cada
@@ -825,10 +846,10 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //segmento de la regresión para un vector concreto de parámetros.
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Este método no es necesario para la simulación pero sí es recomendable
@@ -836,15 +857,15 @@
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //para su posterior diagnosis e inferencia.
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Set eval(Matrix values) 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
@@ -872,35 +893,35 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 NameBlock my_config =
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 [[
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   Real mcmc.burnin        =  500;
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
   Real mcmc.sampleLength  = 5000
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 ]];
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
@@ -927,6 +948,12 @@
 \series default
  de 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/bsr/dynhlm/_db_api.estim.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/dynhlm/_db_api.estim.tol
+\end_layout
 
 \end_inset
@@ -942,40 +969,40 @@
 status open
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //////////////////////////////////////////////////////////////////////////////
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Notifica la inicialización de la cadena de Markov, 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //informando del número de variables y el path de almacenamiento
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Real initializing(Real numVar, Text path)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //Notifica que se está simulando la realización 
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 //numSim de la cadena de Markov
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 Real simulating(Real numSim)
 \end_layout
 
-\begin_layout Standard
+\begin_layout Plain Layout
 
 ///////////////////////////////////////////////////////////////////////////////
@@ -1075,5 +1102,6 @@
 \series default
  devuelve un informe de diagnosis e inferencia básica (ver 
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "sub:BysMcmc::Inference"
 
@@ -1091,11 +1119,18 @@
 \series default
  que se puede ver en 
-\begin_inset LatexCommand url
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_structs.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_structs.tol
+\end_layout
 
 \end_inset
 
  y que se comentarán más adelante en
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "sub:BysMcmc::Inference"
 
@@ -1130,5 +1165,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sub:Nameblock-BysMcmc::DefineBlock()"
 
@@ -1140,6 +1176,12 @@
 \begin_layout Standard
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_defineBlock.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_defineBlock.tol
+\end_layout
 
 \end_inset
@@ -1167,5 +1209,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sub:BysMcmc::_.cmsg"
 
@@ -1177,6 +1220,12 @@
 \begin_layout Standard
 En el fichero 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_cmsgs.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_cmsgs.tol
+\end_layout
 
 \end_inset
@@ -1191,6 +1240,12 @@
 \series default
  implementado en 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/general/system/cmsg/_coded.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/general/system/cmsg/_c
+oded.tol
+\end_layout
 
 \end_inset
@@ -1223,5 +1278,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sub:BysMcmc::Inference"
 
@@ -1233,6 +1289,12 @@
 \begin_layout Standard
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_inference.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_inference.tol
+\end_layout
 
 \end_inset
@@ -1241,6 +1303,12 @@
  bayesianas a partir de cadenas de Markov previamente simuladas definidos
  en el fichero 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_inference_functions.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_inference_functions.tol
+\end_layout
 
 \end_inset
@@ -1313,5 +1381,6 @@
 \series default
 : Una tabla con una fila para el resultado del test de Raftery de CODA 
-\begin_inset LatexCommand cite
+\begin_inset CommandInset citation
+LatexCommand cite
 key "CODA-Convergence-diagnosis-output-analysis"
 
@@ -1323,6 +1392,12 @@
 \series default
  que se puede ver en 
-\begin_inset LatexCommand url
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_structs.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_structs.tol
+\end_layout
 
 \end_inset
@@ -1347,5 +1422,6 @@
 \series default
 : Una tabla con una fila para el resultado del sumario CODA 
-\begin_inset LatexCommand cite
+\begin_inset CommandInset citation
+LatexCommand cite
 key "CODA-Convergence-diagnosis-output-analysis"
 
@@ -1357,6 +1433,12 @@
 \series default
  que se puede ver en 
-\begin_inset LatexCommand url
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/_structs.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/_structs.tol
+\end_layout
 
 \end_inset
@@ -1435,5 +1517,6 @@
 
 \family typewriter
-\begin_inset LatexCommand label
+\begin_inset CommandInset label
+LatexCommand label
 name "sub:BysMcmc::Bsr"
 
@@ -1445,6 +1528,12 @@
 \begin_layout Standard
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/bsr/_bsr.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/_bsr.tol
+\end_layout
 
 \end_inset
@@ -1457,6 +1546,12 @@
 \begin_layout Itemize
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/bsr/gibbs/_gibbs.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/gibbs/_gibbs.tol
+\end_layout
 
 \end_inset
@@ -1468,5 +1563,6 @@
  que incluye el simulador de Gibbs de BSR propiamente dicho que se explica
  en detalle en 
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "cha:BysMcmc::Bsr::Gibbs"
 
@@ -1478,6 +1574,12 @@
 \begin_layout Itemize
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/bsr/_import.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/_import.tol
+\end_layout
 
 \end_inset
@@ -1489,5 +1591,6 @@
  que contiene la API genérica de definición de modelos de BSR cuya descripción
  se encuentra en 
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "cha:BysMcmc::Bsr::Import"
 
@@ -1499,6 +1602,12 @@
 \begin_layout Itemize
 En 
-\begin_inset LatexCommand htmlurl
-target "http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayesian/bysMcmc/bsr/dynhlm/_dynhlm.tol"
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/dynhlm/_dynhlm.tol
+\end_layout
 
 \end_inset
@@ -1512,5 +1621,6 @@
  ocurren en el tiempo.
  Para un estudio en profundidad de este tema ver 
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "cha:BysMcmc::Bsr::DynHlm"
 
@@ -1518,4 +1628,28 @@
 
 
+\end_layout
+
+\begin_layout Itemize
+En 
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://cvs.tol-project.org/viewcvs.cgi/*checkout*/tol/stdlib/math/stat/models/bayes
+ian/bysMcmc/bsr/_oneNode.tol
+\end_layout
+
+\end_inset
+
+ se define el miembro 
+\series bold
+NameBlock BysMcmc::Bsr::OneNode
+\series default
+ que contiene una API simplificada que construye directamente un BSR.ModelDef
+ a partir de un NameBlock con una estructura bastante sencilla para el caso
+ de un modelo BSR con un solo nodo observacional.
+ En estos casos no se necesita crear un archivo BSR ASCII ni mucho menos
+ almacenar información alguna en la base de datos.
 \end_layout
 
@@ -1524,5 +1658,6 @@
  ficheros de datos ASCII con formato .bsr, el cual está implementado en la
  función built-in C++ de TOL Bsr.Parse que se describe en 
-\begin_inset LatexCommand ref
+\begin_inset CommandInset ref
+LatexCommand ref
 reference "cha:El-formato-ASCII-BSR"